Eliminar barniz/lodo/agua/partículas

Unidad de deshidratación coalescente de la serie WJJ

Remove sub-micon particles (0.1 μm)

WJL uses the balanced charge technology to charge the small size contaminants by positive(+) &negative(-) electrodes. As fluid mixed again, oppositely charged contaminants attract to each other to agglomerate to form larger size that can be captured and removed by standard fine filters. WJL can not only remove sub-micron contamination, but also completely remove polar sludge and varnish inside which greatly improve the cleanliness level of your lubricating & hydraulic system.

Product Features

》The dual charging agglomeration technology increases the filtration level to sub-micron, which can not only filter out all particulate pollutants as small as 0.1 microns in the fluid, but also actively remove them.

》Adopt advanced automatic drainage device, no need to manually drain water; low power consumption (total power only 1.1-7.5KW), low operating cost; long continuous running time (over 500 hours);

》Filter at room temperature, without heating,simple and compact structure, easy to use and maintain, and can be operated online.

Flow Chart

Principio de funcionamiento

Dual Charging Technology

First of all, lubricating oils pass through pre-filter, some of the large-size particles get removed, and the remaining particulate contaminants accompany the oil into the charging and mixing process.

2 paths are set up at the charging and mixing area, and the oil is charged by electrodes with positive and negative charges respectively. The fine particles flowing through are induced positive(+) and negative(-) charges respectively and then mixed together again.

The positive and negative charges interact with each other in the respective electric field, and the positive/negative charged particulates absorb each other and grow up larger and the particulate contaminants become particles gradually and finally are captured and removed by the filters.

Water Coalescencing Separation

Phase 1: coalescence
Typically, coalescing filters made of synthetic fiberglass media. The hydrophilic (Water loving) fibers attract free water droplets. At the intersection of the fibers, water droplets pool together (Coalesce) and growing larger. Once the water droplets are large enough, gravity pulls the droplet to the bottom of the vessel and removed from oil system.

Phase 2: Separation
The synthetic Hydrophobic materials are used as water barrier. Then, the water drops will be isolated in tank when fluid final pass through that dry fluid flow over to next process. The separating filter works with coalescing filter element to remove water effectively.