El agua que fluye a través de la ciudad

Evaporador de vacío con bomba de calor serie LT

Evaporador de vacío con bomba de calor serie LT

  • Soliges LT is a vacuum evaporator using a heat pump, fully automatic control
  • Clean water production vary from 0.2T-120T/ day
  • The vacuum is maintained at about -96KPar,  the evaporation temperature is maintained at about 37℃
  • Energy sources are electricity and compressed air

Process

  1. Pre heating  The operation of the water pump generates a vacuum, the evaporator automatically feeds water,   the compressor generates heat to heat the wastewater in the evaporation tank. Under the vacuum state, the temperature of the wastewater rises and begins to evaporate,  the preheating is completed. 
  2. Evaporation process the evaporation temperature is maintained at 35-40°C. The compressor heats the refrigerant, causing rapid water evaporation. Simultaneously, the refrigerant cools via an expansion valve. The wastewater is reheated through the compressor. If bubbles form during evaporation, a sensor triggers automatic defoaming. After one cycle, the concentrated liquid is discharged, with cycle duration adjustable as needed.
  3. Descarga de concentrado  After one evaporation cycle is completed, the compression pump stops working, the pneumatic valve of the concentrate pipeline is opened, the evaporation tank is pressurized, and the concentrated hydraulic pressure is poured into the concentration barrel

Technology process

Evaporador de vacío con bomba de calor serie LT

Principio de funcionamiento

Evaporador de vacío con bomba de calor serie LT

Datos técnicos

Evaporador de vacío con bomba de calor serie LT

Application

Casos relacionados

es_ESEspañol